High Pressure Seamless Boiler Tube

High pressure seamless boiler tube ASTM A335 We can manufactture and supply steel boiler tubes to customer, the specifications include sizes from 1 in. to 26 in. diameter with wall thicknesses from .049 in. to 1.312 in. lengths up to 55 feet. Types of steel tube include ultra hig h strength...

Send Inquiry

High pressure seamless boiler tube  ASTM A335 


We can manufactture and supply steel boiler tubes to customer, the specifications include sizes from 1 in. to 26 in. diameter with wall thicknesses from .049 in. to 1.312 in.  lengths up to 55 feet. Types of steel tube include ultra high strength (UHS), high strength low alloy (HSLA), deep drawn inclusion free (DDIF), aluminum-killed drawn quality (AKDQ), ultra-low carbon (ULC) & specialty steel chemistries to customer spec. 


ASTM A335 Seamless Ferritic Alloy Steel Pipe for High-Temperature Service


Chemical Composition:
Grade  C  Mn  P  S  Si  Mo
 P1  0.10-0.20  0.30-0.80  0.025  0.025  0.10-0.50  0.44-0.65
 P2  0.10-0.20  0.30-0.61  0.025  0.025  0.10-0.30  0.44-0.65
 P5  0.15max  0.30-0.60  0.025  0.025  0.50max  0.45-0.65
 P5b  0.15max  0.30-0.60  0.025  0.025  1.00-2.00  0.45-0.65
 P5c  0.12max  0.30-0.60  0.025  0.025  0.50max  0.45-0.65
 P9  0.15max  0.30-0.60  0.025  0.025  0.25-1.00  0.90-1.10
 P11  0.05-0.15  0.30-0.60  0.025  0.025  0.50-1.00  0.44-0.65
 P12  0.05-0.15  0.30-0.61  0.025  0.025  0.50max  0.44-0.65
 P15  0.05-0.15  0.30-0.60  0.025  0.025  1.15-1.65  0.44-0.65
 P21  0.05-0.15  0.30-0.60  0.025  0.025  0.50max  0.80-1.06
 P22  0.05-0.15  0.30-0.60  0.025  0.025  0.50max  0.87-1.13
 P23  0.04-0.10  0.10-0.60  0.030max  0.010max  0.50max  0.05-1.30
Mechanical Properties
Mechanical properties  P1,P2  P12  P23  P91  P92,P11  P122
 Tensile strength  380  415  510  585  620  620
 Yield strength  205  220  400  415  440  400


Heat Treatment

A / N+T

N+T / Q+T

N+T

Material & Manufacture

Seamless Pipe may be either hot finished or cold drawn with the finishing heat treatment noted below.

Heat Treatment Requirements
Grade Heat Treatment Type
P5, P9, P11, and P22
Normalizing Temperature Range F [C] Subcritical Annealing or Tempering
Temperature Range F [C]
A335 P5 (b,c) Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
Subcritical Anneal (P5c only) ***** 1325 – 1375 [715 - 745]
A335 P9 Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
A335 P11 Full or Isothermal Anneal
Normalize and Temper ***** 1200 [650]
A335 P22 Full or Isothermal Anneal
Normalize and Temper ***** 1250 [675]
A335 P91 Normalize and Temper 1900-1975 [1040 - 1080] 1350-1470 [730 - 800]
Quench and Temper 1900-1975 [1040 - 1080] 1350-1470 [730 - 800]
Mechanical Tests Specified

Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test
For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each treated lot. For small lots, at least one pipe shall be tested.
For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipe.

Notes for Hardness Test:
P91 shall not have a hardness not exceeding 250 HB/265 HV [25HRC].

Notes for Bend Test:
For pipe whose diameter exceeds NPS 25 and whose diameter to wall thickness ratio is 7.0 or less shall be subjected to the bend test instead of the flattening test.
Other pipe whose diameter equals or exceeds NPS 10 may be given the bend test in place of the flattening test subject to the approval of the purchaser.
The bend test specimens shall be bent at room temperature through 180 without cracking on the outside of the bent portion.

Hydrostatic Test

The inside diameter of the bend shall be 1 inch [25 mm].
Each length of pipe shall be Hydro tested, at option of manufacture nondestructive electric testing can be used.


u=211201401,3663240645&fm=27&gp=0.jpg

u=3240051989,3280139614&fm=27&gp=0.jpg



Hot Tags: high pressure seamless boiler tube, China, suppliers, factory, cheap, price, discount, bulk, customized
Related Products
Inquiry