Standard Specification for Line Pipe The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe. This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil. Size...
The American Petroleum Institute specification API 5L covers seamless and welded steel line pipe. This is steel pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil. Size range is limited only by manufacturer’s capabilities.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, which standardizes pipeline transportation systems within the materials, equipment and offshore structures for petroleum, petrochemical, and natural gas industries. The technical committee authoring the standards recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25 ,A ,B (and the following “X” Grades), X42, X46, X52, X56, X60, X65, X70, X80. The two digit number following the “X” indicates the Minimum Yield Strength (in 000’s psi) of pipe produced to this grade.
Sizes Nominal Pipe Size 8″ to 118″ O.D. for SSAW WELDED PIPE Wall Thickness – Schedule 10 through 160, STD, XS, XXS.
Standard API 5L
Product Specification Level PSL-2
Steel grade X52 Chemical Properties %
API 5L PSL-1 X52 API 5L PSL-2 X52
Tensile strength, min /max, psi (MPa) 66,700(460)/ n/a66,700 / 110,200
a. For each reduction of 0.01% below the specified maximum concentration for carbon, an increase of 0.05% above the specified maximum concentration for manganese is permissible, up to a maximum of 1.65% for > grades B, but < X52; up to a maximum of 1.75% for grades >X52, but <X70; and up to a maximum of 2.00% for grade X70
b. The sum of the niobium, vanadium, and titanium concentrations shall be < 0.06%.
c. Unless otherwise agreed, 0.50% maximum for copper, 0.30% maximum for nickel, 0.30% maximum for chromium, and 0.12% maximum for molybdenum.
Select differences between PSL 1 and PSL 2:
CVN impact (Charpy) testing
Required for all grades
Nondestructive inspection of seamless
Only when purchaser specifies SR4
Certificates when specified per SR15
Certificates (SR 15.1) mandatory
Traceable only until all tests are passed, unless SR15 is specified
Traceable after completion of tests (SR 15.2) mandatory
Note: This is summarized information from API Specification 5L. Please refer to the specific Standard or Specification or contact us for more details.
Hot Tags: ssaw line pipe 2032mm diameter api 5l x52, China, suppliers, factory, cheap, price, discount, bulk, customized