CGPCO
ST33 DIN 2440 Seamless Threaded Tubes 1.25in Diameter SCH 40 6m Length
DIN 2440 Grade St 33-2 Threaded Seamless Pipes
DIN 2440 Grade St 33-2 Carbon Steel Seamless Tubes are also known as mild steel pipes and tubes. it is easy to form and shape .These pipes are manufactured as per DIN Specification and commercially referred as cs pipes or ms pipes.Low Carbon Steel Pipes are not as hard as hig carbon steel pipes,Though carburizing can increase its surface hardness.
DIN 2440 Grade St 33-2 standard applies to seamless tubes including tubes for headers of heat-resistant steels which are used in the construction of boilers, pipe-lines, pressure vessels and equipment for service up to 600″ and at simultaneous high pressures, where the to total stress and the relevant scaling conditions can raise or lower the temperature limit. Our pipe are been supplied in both Plain Square cut, Deburred Ends or Bevelled End.
ST33-2 DIN 2440 Seamless Tubes Mechanical Properties
Find ST33-2 DIN 2440 Seamless Tubes Mechanical Properties, DIN 2440 Grade St 33-2 Properties
| Steel Grade | Tensile Strength,N/mm2(min) | Yield Strength,N/mm2(min) | Elongation, % (min) |
| St 33.2 | 290 – 310 | 185 | 18 |
Chemical Composition Of DIN 2440 St33.2 Carbon Steel Tube
Find DIN 2440 ST33.2 Carbon Steel Tube Chemical Composition, Chemical Composition of DIN 2440 Pipe
| Steel Grade | C | Si | Mn | Cr | Ni | Mo |
| St 33 | It is not normalized | |||||
Din 2440 St33 Seamless Steel Pipe Specifications
| DIN EN iso 2440 Seamless Pipe Size | Diameter 4 to 219mm, W. T.: 0.5 to 30mm |
|---|---|
| Steel Pipe DIN 2440 Tube Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| DIN 2440 st33 Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| EN 10255 DIN 2440 Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| DIN 2440 ST 33.2 CS Length | Single Random, Double Random, Standard & Cut length Pipe & Tube |
| NORMA Tubo DIN 2440 Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, threaded |
| DIN 2440 ST 33-2 Carbon Steel Form | Round, Hydraulic, ‘U’ bent or Hollow, Straight Pipe, Clad Pipe, Rectangular, Square Pipe Etc |
| NORMA DIN 2440 End | Plain End, Beveled End, Treaded Pipe & Tube |
| DIN 2440 ISO 65 Application | Oil Pipe & Tube, Gas Pipe & Tube, Fluid Pipe & Tube, Boiler Pipe & Tube, Heat exchanger Tube |
| We can also cut, thread, and groove DIN 2440 ST 33.2 CS Pipe to meet your specifications. Pipe Dimension ANSI/ ASME B36.19, B36.10, B2.1 | |
Hot Tags: din 2440 st33 seamless threaded tubes 1.25in diameter sch 40 6m length, China, suppliers, factory, cheap, price, discount, bulk, customized, erw pipe gb/t3091, api k55 casing, aviation fuel transmission seamless pipe, welded stainless steel pipe astm a358, seamless line pipe api 5l, 15crmog alloy steel tube
